How To Change Mount Ring Nikon Lense ?
To change the mount ring on a Nikon lens, you will need to follow these steps:
1. Remove the lens from the camera body by pressing the lens release button and twisting it counterclockwise.
2. Locate the mount ring on the lens, which is the metal ring that connects the lens to the camera body.
3. Use a small screwdriver or a lens spanner tool to unscrew the screws holding the mount ring in place. Be careful not to damage the lens or any internal components.
4. Once the screws are removed, gently lift off the old mount ring from the lens.
5. Take the new mount ring and align it with the lens, making sure it fits securely.
6. Use the screws you removed earlier to attach the new mount ring to the lens. Tighten them carefully, but not too tight.
7. Once the new mount ring is securely in place, reattach the lens to the camera body by aligning the lens mount with the camera mount and twisting it clockwise until it locks into place.
It is important to note that changing the mount ring on a lens requires technical knowledge and skill. If you are not confident in your abilities, it is recommended to seek professional assistance or contact the manufacturer for guidance.
1、 Detaching the old mount ring from the Nikon lens
To change the mount ring on a Nikon lens, you will need to follow a few steps. Here is a guide on how to detach the old mount ring from the Nikon lens:
1. Gather the necessary tools: You will need a small screwdriver, lens spanner wrench, and a clean workspace.
2. Remove the lens from the camera body: Before starting the process, make sure the lens is detached from the camera body to avoid any damage.
3. Locate the screws: Look for the screws that hold the mount ring in place. These screws are usually located on the backside of the lens near the mount.
4. Unscrew the mount ring: Use the small screwdriver to carefully unscrew the screws. Make sure to keep track of the screws as you remove them.
5. Use the lens spanner wrench: Once the screws are removed, use the lens spanner wrench to loosen the mount ring. Insert the wrench into the notches on the mount ring and gently turn counterclockwise to loosen it.
6. Remove the old mount ring: Once the mount ring is loose, carefully lift it off the lens. Be cautious not to damage any other components of the lens during this process.
7. Clean and prepare the new mount ring: Before attaching the new mount ring, clean the lens and the new ring to ensure a secure fit. Remove any dust or debris from the lens surface.
8. Attach the new mount ring: Align the new mount ring with the lens and gently press it into place. Use the lens spanner wrench to tighten the ring by turning it clockwise.
9. Secure the screws: Once the new mount ring is in place, reinsert and tighten the screws using the small screwdriver.
10. Test the lens: After completing the process, attach the lens back to the camera body and test it to ensure proper functionality.
It is important to note that changing the mount ring on a Nikon lens requires precision and care. If you are unsure or uncomfortable with the process, it is recommended to seek professional assistance or contact Nikon customer support for guidance.
2、 Attaching the new mount ring to the Nikon lens
To change the mount ring on a Nikon lens, follow these steps:
1. Start by removing the lens from the camera body. Ensure that the lens is turned off and the camera is powered off before detaching it.
2. Locate the mount ring on the lens. This is the metal ring that connects the lens to the camera body. It is usually marked with the lens model and other information.
3. Use a small screwdriver or a lens spanner tool to remove the screws holding the mount ring in place. Carefully unscrew each screw, making sure not to damage the lens or any internal components.
4. Once the screws are removed, gently lift off the old mount ring from the lens. Be cautious not to touch the lens elements or expose them to dust or debris.
5. Take the new mount ring and align it with the lens. Ensure that the mounting holes on the ring match up with the holes on the lens.
6. Carefully insert the screws into the mounting holes and tighten them using the screwdriver or lens spanner tool. Make sure not to overtighten the screws, as this could damage the lens or the new mount ring.
7. Once all the screws are securely tightened, reattach the lens to the camera body. Ensure that it is properly aligned and locked into place.
It is important to note that changing the mount ring on a Nikon lens should be done with caution and precision. If you are unsure or uncomfortable performing this task yourself, it is recommended to seek assistance from a professional camera technician.
3、 Ensuring proper alignment and fit of the mount ring
To change the mount ring on a Nikon lens, follow these steps:
1. Remove the lens from the camera body by pressing the lens release button and twisting the lens counterclockwise.
2. Place the lens on a clean and stable surface, ensuring that the rear lens element is facing up.
3. Locate the mount ring on the lens, which is the metal ring that connects the lens to the camera body.
4. Use a small screwdriver or a lens spanner tool to remove the screws that secure the mount ring to the lens. Be careful not to damage the lens or any internal components.
5. Once the screws are removed, gently lift the old mount ring off the lens. Take note of its orientation and any alignment marks for reference.
6. Clean the lens mount area and the new mount ring to remove any dust or debris.
7. Align the new mount ring with the lens mount area, ensuring that any alignment marks match up. Carefully lower the new mount ring onto the lens.
8. Insert and tighten the screws to secure the new mount ring in place. Be cautious not to overtighten the screws, as this could damage the lens.
9. Once the mount ring is securely attached, reattach the lens to the camera body by aligning the lens mount with the camera mount and twisting it clockwise until it locks into place.
Ensuring proper alignment and fit of the mount ring is crucial to maintain the lens's performance and avoid any damage. It is recommended to refer to the lens's user manual or consult a professional technician if you are unsure about the process. Additionally, it is important to note that changing the mount ring on a lens may void any warranty, so proceed with caution.
4、 Testing the functionality of the newly installed mount ring
To change the mount ring on a Nikon lens, follow these steps:
1. Remove the lens from the camera body by pressing the lens release button and twisting the lens counterclockwise.
2. Place the lens on a clean and stable surface with the rear element facing up.
3. Locate the mount ring on the lens, which is the metal ring that connects the lens to the camera body.
4. Use a small screwdriver or a lens spanner tool to remove the screws holding the mount ring in place. Be careful not to scratch or damage the lens or the mount ring.
5. Once the screws are removed, gently lift the old mount ring off the lens. Take note of any alignment marks or indicators on the mount ring for reference during reassembly.
6. Align the new mount ring with the lens and carefully place it in position.
7. Insert and tighten the screws to secure the new mount ring. Ensure that they are tightened evenly to avoid any misalignment.
8. Once the mount ring is securely attached, reattach the lens to the camera body by aligning the red dot on the lens with the corresponding dot on the camera body and twisting the lens clockwise until it locks into place.
9. Test the functionality of the newly installed mount ring by mounting the lens on the camera and checking if it attaches and detaches smoothly. Also, test the autofocus and manual focus capabilities to ensure they are working properly.
It is important to note that changing the mount ring on a lens should be done with caution and precision. If you are unsure or uncomfortable with performing this task yourself, it is recommended to seek assistance from a professional camera technician.