How To Clean Apple Keyboard White ?
To clean an Apple keyboard that is white, you can start by turning off your computer and unplugging the keyboard. Use a soft, lint-free cloth slightly dampened with water to gently wipe the keys and the surface of the keyboard. Avoid using excessive water or any harsh cleaning agents that could damage the keyboard. For stubborn stains or dirt, you can use a mild, non-abrasive cleaner specifically designed for electronics. Apply the cleaner to the cloth and then wipe the affected areas. Make sure to dry the keyboard thoroughly before plugging it back in and turning on your computer.
1、 Removing dirt and debris from the keys
To clean a white Apple keyboard, you can follow these steps:
1. Start by turning off your computer and unplugging the keyboard from the USB port. This will prevent any accidental damage to your computer and ensure your safety.
2. Use a can of compressed air to remove any loose dirt and debris from the keys. Hold the can upright and spray short bursts of air between the keys. This will help dislodge any particles that may be stuck.
3. Next, dampen a soft cloth with a mixture of mild soap and water. Make sure the cloth is not dripping wet, as excess moisture can damage the keyboard. Gently wipe down the keys, paying extra attention to any areas that appear dirty or stained.
4. For stubborn stains or grime, you can use a cotton swab dipped in isopropyl alcohol. Rub the affected area gently until the stain is removed. Be careful not to use too much alcohol, as it can damage the keyboard's finish.
5. Once you have cleaned all the keys, use a dry cloth to wipe away any excess moisture. Make sure the keyboard is completely dry before plugging it back in and turning on your computer.
It's worth noting that Apple now offers keyboards with a silicone membrane under the keys, which helps protect against dust and debris. This design change has made cleaning the keyboard easier and more effective. However, it's still important to follow the steps above to ensure a thorough cleaning without causing any damage.
2、 Cleaning the surface of the keyboard
To clean a white Apple keyboard, you can follow these steps:
1. Turn off your computer and unplug the keyboard from the computer or power source. This will prevent any accidental damage while cleaning.
2. Shake the keyboard gently to remove any loose debris or crumbs that may have accumulated between the keys.
3. Use a can of compressed air to blow away any remaining dust or dirt from the keyboard. Hold the can upright and use short bursts of air to avoid damaging the keys or internal components.
4. Dampen a soft, lint-free cloth with a mixture of mild soap and water. Make sure the cloth is not dripping wet, as excess moisture can damage the keyboard. Alternatively, you can use a mild disinfectant wipe.
5. Gently wipe the surface of the keyboard, paying extra attention to the areas between the keys. Avoid using excessive pressure or scrubbing, as this can cause the keys to become loose or damaged.
6. For stubborn stains or grime, you can use a cotton swab dipped in isopropyl alcohol. Rub the affected area gently until the stain is removed.
7. Once you have cleaned the entire keyboard, use a dry cloth to remove any excess moisture. Allow the keyboard to air dry completely before plugging it back in or turning on your computer.
It's important to note that Apple recommends avoiding the use of aerosol sprays, solvents, or abrasive cleaners on their keyboards, as these can cause damage. Additionally, be cautious when using liquids near electronic devices to prevent any accidental spills.
3、 Disinfecting the keyboard
To clean a white Apple keyboard, you can follow these steps:
1. Disconnect the keyboard: Before cleaning, make sure to disconnect the keyboard from your computer or device to avoid any electrical damage.
2. Remove dust and debris: Use a can of compressed air or a soft brush to gently remove any dust or debris from the keyboard. Pay attention to the spaces between the keys where dirt can accumulate.
3. Wipe with a damp cloth: Dampen a soft cloth with water or a mild cleaning solution. Make sure the cloth is not dripping wet, as excess moisture can damage the keyboard. Gently wipe the keys and the surface of the keyboard, removing any stains or smudges. Avoid using excessive force to prevent any damage.
4. Disinfecting the keyboard: In light of the COVID-19 pandemic, it is important to disinfect frequently touched surfaces, including keyboards. You can use disinfecting wipes or a solution of 70% isopropyl alcohol to disinfect the keyboard. Apply the disinfectant to a cloth and wipe the keys and surface thoroughly. Allow the keyboard to air dry before reconnecting it.
5. Regular maintenance: To keep your white Apple keyboard clean, it is recommended to regularly wipe it with a soft cloth and mild cleaning solution. Avoid using harsh chemicals or abrasive materials that can damage the keyboard's surface.
It's worth noting that Apple has specific guidelines for cleaning their products, so it's always a good idea to refer to their official documentation or website for the most up-to-date information on cleaning your specific keyboard model.
4、 Cleaning the keycaps
To clean an Apple keyboard, specifically the white keycaps, you can follow these steps:
1. Start by turning off your computer and unplugging the keyboard from the computer or power source. This will prevent any accidental damage while cleaning.
2. Use a soft, lint-free cloth or microfiber cloth to gently wipe the surface of the keycaps. This will remove any dust or debris that may have accumulated.
3. For more stubborn stains or dirt, you can dampen the cloth slightly with water or a mild cleaning solution. Make sure to wring out any excess liquid before wiping the keycaps to avoid any moisture damage.
4. If there are any sticky or greasy spots on the keycaps, you can use a small amount of isopropyl alcohol on the cloth to gently clean those areas. Be careful not to use too much alcohol, as it can damage the keycaps or the keyboard.
5. For a more thorough cleaning, you can remove the keycaps from the keyboard. Apple keyboards usually have keycaps that can be easily removed by gently prying them off with a keycap puller or a small flathead screwdriver. Once removed, you can clean the keycaps individually with a cloth or soak them in warm soapy water. Make sure to dry them thoroughly before reattaching them to the keyboard.
It's important to note that the latest point of view suggests avoiding harsh cleaning agents or abrasive materials, as they can damage the keycaps or the keyboard. Additionally, it's always a good idea to refer to the manufacturer's instructions or guidelines for cleaning your specific Apple keyboard model.