How To Dry Out Wet Phone ?
To dry out a wet phone, the first step is to turn off the device and remove the battery (if possible). Then, gently wipe away any excess water with a dry cloth or paper towel. Next, place the phone in a container filled with uncooked rice or silica gel packets, which will absorb the moisture. Leave the phone in the container for at least 24-48 hours, without turning it on or attempting to charge it. After this time, reinsert the battery (if removed) and turn on the phone to see if it works. If the phone still does not work, it may be necessary to take it to a professional for repair or replacement. It is important to avoid using a hair dryer or other heat source to dry out the phone, as this can cause further damage.
1、 Rice method
How to dry out a wet phone? The most popular and widely used method is the Rice method. This method involves placing the wet phone in a container filled with uncooked rice and leaving it for a few days. The rice absorbs the moisture from the phone, and hopefully, the phone will work again.
However, recent studies have shown that the Rice method may not be the most effective way to dry out a wet phone. The rice may not be able to absorb all the moisture from the phone, and the starch from the rice may even get inside the phone and cause further damage.
A better alternative to the Rice method is to use a desiccant, such as silica gel or cat litter. These materials are designed to absorb moisture and are more effective than rice. Simply place the wet phone in a container with the desiccant and leave it for a few days.
Another option is to use a vacuum chamber. This method involves placing the wet phone in a vacuum-sealed bag with a desiccant and using a vacuum pump to remove the air from the bag. The low pressure inside the bag helps to evaporate the moisture from the phone.
In conclusion, while the Rice method may be the most popular way to dry out a wet phone, it may not be the most effective. Using a desiccant or a vacuum chamber may be a better option. It is important to act quickly when a phone gets wet and to avoid turning it on until it is completely dry to prevent further damage.
2、 Silica gel method
Silica gel method is one of the most effective ways to dry out a wet phone. Silica gel is a desiccant that absorbs moisture and can be found in small packets that are often included in shoe boxes or other products to keep them dry. Here's how to use silica gel to dry out a wet phone:
1. Remove the phone from the water as soon as possible and turn it off.
2. Remove the battery, SIM card, and any other removable parts.
3. Use a towel or cloth to gently dry the phone as much as possible.
4. Place the phone and its parts in a container filled with silica gel packets.
5. Seal the container and leave it for at least 24 hours.
6. After 24 hours, remove the phone and its parts from the container and reassemble it.
7. Turn on the phone and check if it works properly.
It's important to note that silica gel method may not work for all cases of water damage. If the phone has been submerged in saltwater or other liquids, it may cause corrosion and damage that cannot be repaired. In addition, if the phone has been damaged by water, it's important to take it to a professional for repair or replacement.
3、 Vacuum method
How to dry out wet phone? One effective method is the vacuum method. This involves using a vacuum cleaner to suck out the moisture from the phone. To do this, first, turn off the phone and remove the battery (if possible). Then, place the phone in a sealable plastic bag with a few packets of silica gel or uncooked rice. The silica gel or rice will absorb the moisture from the phone. Next, attach the hose of the vacuum cleaner to the bag and turn it on. The vacuum will create a low-pressure environment that will draw out the moisture from the phone.
However, it is important to note that this method may not work for all types of phones. Some newer phones have water-resistant features that may prevent the vacuum method from being effective. Additionally, if the phone has been submerged in saltwater or other liquids, the vacuum method may not be enough to remove all the moisture and prevent corrosion.
In such cases, it is recommended to take the phone to a professional repair shop or contact the manufacturer for assistance. It is also important to avoid using heat sources such as hair dryers or ovens to dry out the phone, as this can cause further damage. Overall, the vacuum method can be a useful tool for drying out a wet phone, but it is important to assess the situation and consider other options if necessary.
4、 Alcohol method
Alcohol method is one of the most popular ways to dry out a wet phone. Here are the steps to follow:
1. Turn off the phone immediately and remove the battery (if possible). This will prevent any short circuits from occurring.
2. Fill a bowl with 90% isopropyl alcohol. This type of alcohol is highly effective in removing moisture from electronic devices.
3. Place the phone in the bowl of alcohol and let it soak for about 5-10 minutes. Make sure the phone is completely submerged.
4. Remove the phone from the alcohol and shake off any excess liquid.
5. Place the phone in a bowl of uncooked rice or silica gel packets. These materials will absorb any remaining moisture from the phone.
6. Leave the phone in the rice or silica gel for at least 24 hours. Do not turn on the phone during this time.
7. After 24 hours, remove the phone from the rice or silica gel and reinsert the battery (if possible).
8. Turn on the phone and check if it is working properly.
It is important to note that the alcohol method may not work for all types of phones and situations. In some cases, it may even cause further damage to the phone. It is always best to consult a professional or the phone manufacturer for advice on how to dry out a wet phone. Additionally, some newer phones are water-resistant and may not require any special treatment if they get wet.
