How To Fold Chemex Square Filter ?

To fold a Chemex square filter, follow these steps:

1. Start by placing the filter in the Chemex with the three-layered side facing the spout.

2. Fold the filter in half, making sure the edges are aligned.

3. Fold the filter in half again, this time bringing the two corners opposite the spout together.

4. Open up the filter and you should see a cone shape.

5. Place the filter back into the Chemex, making sure the three-layered side is still facing the spout.

6. Pre-wet the filter with hot water to remove any paper taste and to warm up the Chemex.

7. Discard the water and add your coffee grounds.

8. Proceed with your brewing method as usual.

1、 Preparing the filter

Preparing the filter for your Chemex coffee maker is an essential step in ensuring a delicious cup of coffee. The Chemex square filter is made of high-quality paper that is thicker than most coffee filters, which helps to remove any unwanted flavors or oils from the coffee. Here's how to fold the Chemex square filter:

1. Start by unfolding the filter and placing it in the Chemex. The three-layered side should be facing the spout.

2. Fold the filter in half, making sure that the two sides are even.

3. Fold the filter in half again, creating a quarter-fold.

4. Open up the filter and shape it into a cone. The three-layered side should be on the side of the cone that will be facing the spout.

5. Place the filter back into the Chemex, making sure that the cone shape is centered and the three-layered side is facing the spout.

6. Rinse the filter with hot water to remove any paper taste and preheat the Chemex.

7. Discard the rinse water and add your coffee grounds.

It's important to note that some coffee enthusiasts prefer to rinse the filter with cold water instead of hot water. This is because hot water can cause the filter to stick to the sides of the Chemex, which can affect the flow rate of the coffee. However, others argue that rinsing with hot water helps to preheat the Chemex and maintain a consistent temperature throughout the brewing process. Ultimately, it's up to personal preference.

2、 Folding the filter in half

How to fold Chemex square filter? The most common and recommended way to fold a Chemex square filter is by folding it in half. This method ensures that the filter fits perfectly into the Chemex brewer and allows for a smooth and even extraction of coffee.

To fold the filter in half, start by placing the filter on a flat surface with the three-layered side facing the spout of the Chemex. Then, fold the filter in half vertically, making sure that the edges are aligned. Next, fold the filter in half again horizontally, creating a cone shape with a pointed tip.

Before placing the filter into the Chemex, wet it with hot water to remove any paper taste and to preheat the brewer. Once the filter is wet, place it into the Chemex with the pointed tip facing the spout and the folded side facing the handle.

Some coffee enthusiasts prefer to rinse the filter with hot water before folding it to remove any dust or debris that may have accumulated during storage. Others prefer to use a pre-folded filter to save time and ensure consistency in their brewing process.

Regardless of the method used, folding the Chemex square filter in half is a simple and effective way to prepare it for brewing delicious coffee.

3、 Folding the filter into a cone shape

To fold a Chemex square filter, there are a few steps you need to follow. First, start by placing the filter in the Chemex with the three-layered side facing the spout. Then, fold the filter in half, making sure the two sides are even.

Next, fold the filter in half again, this time creating a quarter-circle shape. Hold the filter by the pointed end and place it back into the Chemex, making sure the pointed end is facing the spout.

Now, fold the filter into a cone shape by bringing the two sides together and folding them over each other. Make sure the bottom of the cone is flat and even.

Finally, rinse the filter with hot water to remove any paper taste and to preheat the Chemex. Discard the rinse water and add your coffee grounds.

It's important to note that there are different methods for folding a Chemex filter, and some coffee enthusiasts have their own preferred techniques. However, the basic steps outlined above should result in a properly folded filter that will produce a delicious cup of coffee.

4、 Placing the filter in the Chemex

How to fold Chemex square filter:

1. Start by unfolding the Chemex square filter and placing it on a flat surface.

2. Fold the filter in half, bringing the two opposite corners together to form a triangle.

3. Fold the triangle in half again, bringing the two corners together to form a smaller triangle.

4. Place the folded filter into the Chemex, with the three-layered side facing the spout.

5. Open up the filter and adjust it so that it sits flush against the walls of the Chemex.

6. Rinse the filter with hot water to remove any paper taste and preheat the Chemex.

7. Discard the rinse water and add your desired amount of coffee grounds.

8. Slowly pour hot water over the grounds, starting from the center and working your way outwards in a circular motion.

9. Allow the coffee to drip through the filter and into the Chemex.

10. Once the coffee has finished brewing, discard the filter and enjoy your delicious cup of coffee.

It's worth noting that some coffee enthusiasts prefer to use a different folding method, such as the "half-moon" or "accordion" fold, to achieve a different flavor profile. Experiment with different folding methods to find the one that works best for you.