67”/1.7m Aluminum Video Camera Tripod Transverse Center Column 22lbs/10kg Load Flexible for Canon Nikon Sony DSLR,T255A4+BH-28L (TM2515T1)

SKU: KF09.085

Is the head of this tripod compatible with fujifilm camera? And can it be completely rotated for overhead shots? Thank you!

This tripod has his own quick release base to screw into your camera base. The head of the tripod is capable to roll as long as you need, it does not stop at 360* or less, also that rotation can be softened or tightned as you need, and for my opinion, it is very smooth.

How to install the center column?

For how to install the center column, please refer to this video https://youtu.be/3BvJKWNElRg.

Will this tripod support my Celestron Skymaster binoculars & allow me to angle them directly overhead while standing? I am 6' tall.

No. I bought it based on the claim that it would support the weight, but it doesn't. However, i have found that if I don't try to use the cantilevered function, but just use the height of the combined tripod and arm (straight up) and the ball joint holding the binoculars, I have more than enough height to see anything up to about 75 degrees comfortably. In the video, the eyepieces are at 6', and there is easily another foot of extension available.

Does this tripod have a level bubble?

Yes, it has a level bubble. If you look closely in the photographs, there is a round shape near where the camera locks on. That is where the level bubble resides, in the circular protrusion with light green inside. It's hard to see in the photos due to the angles, but it's definitely there! I have this tripod and use the bubble all the time.

How to install the foot locking system?

For how to install the foot locking system, please refer to this video https://youtu.be/jZb6Fn6T_u0.

Can this tripod hold telephoto lens?

To hold telephoto lens, it is recommended to use a tripod mount ring additionally for better balance. Meanwhile, it is better to hang some heavy thing to the hook to lower the center of gravity on this tripod to make it more sturdy and less prone to vibrations.

Would the monopod section be strong enough to attach a gimbal (DJI Osmo 2) for something like overhead/slow sweeping shooting? Thanks

DJI Osmo 2 is not heavy at all, it should handle it.

Do I need to buy a quick release plate with the tripod to attach a mount or does it come with the ability to attach a mount to it?

Its come with its own and it's 1/4" screw quick shoe plate.

How to install the center column?

For how to install the center column, please refer to this video https://youtu.be/3BvJKWNElRg.

Can i use this tripod as an overhead using a webcam? i have a logitech c920.

as long as the webcam has a standard 1/4 screw mount, it could be used with this tripod.