10.1-inch IPS high-definition display HDMI digital electron microscope, 10-1300 magnification, HDMI on screen display, with wireless infrared remote control, compatible with PC
SKU: GW45.0075
A
IPS HD display is a display technology that features wide viewing angles, high contrast, and accurate color reproduction. Compared to other types of displays, IPS screens perform better in terms of viewing angles and image details.
A
To set up the HDMI same-screen display of the digital microscope, you need to connect the HDMI output of the digital microscope to the HDMI input of the external monitor, and make corresponding settings adjustments according to the device's instructions.
A
If there is an image problem when the digital microscope is connected to the monitor via HDMI, you can try to check whether the HDMI cable is firmly connected, confirm that the monitor's input signal source has been switched to the correct HDMI interface, and ensure that the HDMI output of the digital microscope is set correctly.
A
Using the wireless infrared remote control, you can control the functions of the digital microscope by pressing the corresponding buttons, such as adjusting magnification, switching modes, operating shooting, etc. Make sure there is no obstruction between the remote control and the digital microscope, and use it within a reasonable range.
A
You can use the provided USB cable to connect the digital microscope to your computer. Once connected, you can use the appropriate software to view and process images or videos captured by the microscope.
A
The battery life depends on specific usage conditions, such as screen brightness, shooting frequency, etc. Typically, it will last several hours on a full charge, but exact usage times may vary.
A
If the images captured by your digital microscope are blurry or unclear, you can try the following steps: adjust the focus to ensure there is an appropriate distance between the target object and the lens; clean the lens surface to avoid dust or stains affecting the image quality; adjust the light source , make sure the light is sufficient and even.