62mm Square Lens Hood
Related Product
Square Filter Holder System Pro Kit (Filter Holder + 95mm Circular Polarizer + Square GND8 Filter + ND1000  (10 Stop) + 4 Filter Adapter Rings for Camera Lens(Nano-Xcel PRO Series)
FALL SALE
Square Filter Holder System Pro Kit (Filter Holder + 95mm Circular Polarizer + Square GND8 Filter + ND1000 (10 Stop) + 4 Filter Adapter Rings for Camera Lens(Nano-Xcel PRO Series)
187
£209.99
62mm Empty Magnetic Base Ring (Works ONLY with K&F Concept Magnetic Filters / Quick Swap System)
FALL SALE
62mm Empty Magnetic Base Ring (Works ONLY with K&F Concept Magnetic Filters / Quick Swap System)
38
£18.99
Related Faq
Q
What is the size of the lens that can be installed on the lens frame? Can square mirrors of other brands be installed?
A
The size of the square mirror that can be installed is 4*5.65 inches. You can install square mirrors of other brands by yourself 
Q
Can a lens hood be attached to the end of these filters?
A
I have the 77mm. It can't take a lens hood but you can fit a lens cap 
Q
Can a K&F lens cap be attached to the filter? If so, which (lid) size is required for a 62mm filter?
A
I don't know the K&F lid, but any 62mm lid should work. 
Q
Can the filter be used in combination with a lens hood?
A
The filter only has a thread to screw it onto the lens, unfortunately it is not possible to screw a lens hood or another filter onto it. 49mm is the smallest size for the lens ... 
Q
Can you use lee square filters with this holder?
A
As long as lee square filters is 100*100mm, it is okay 
Related Video
Baby Monitor with Night Vision , 5" Full HD Display (720p)
Carbon Fiber Camera Tripod , X324C4+BH-35 (old model EP324C)
67”/170cm Camera Tripod Horizontal Aluminium Tripods Portable Monopod with 360 Degree Ball Head Quick Release Plate
Related Blog

How To Protect Camera Lens From Scratches ?

There are several ways to protect your camera lens from scratches. One of the most effective ways is to use a lens filter. A filter is a piece of glass that attaches to the front of your lens and acts...

How Many Square Feet Is My Pool Filter ?

The square footage of a pool filter can vary depending on the specific model and size. It is recommended to refer to the manufacturer's specifications or product manual for accurate information regard...

Can Lens Hood Screw Into A Hoya Filter ?

No, a lens hood cannot screw into a Hoya filter. A lens hood is typically designed to attach to the front of a camera lens, while a Hoya filter is a separate accessory that screws onto the lens filter...

How To Avoid Lens Flare With Filter ?

To avoid lens flare when using a filter, there are a few techniques you can try. First, make sure your filter is clean and free from any smudges or fingerprints that could cause unwanted reflections. ...

How To Fold Square Filter Paper ?

To fold square filter paper, start by placing the paper on a flat surface with one corner pointing towards you. Fold the paper in half diagonally, bringing the opposite corners together to form a tria...

How To Attach Lens Hoood To 49mm Filter ?

To attach a lens hood to a 49mm filter, you need to follow these steps: 1. Identify the lens hood: Make sure you have the correct lens hood that is compatible with your lens and filter size. 2. Remove...

Are Lens Hood And Filter ?

Lens hood and filter are two different accessories used in photography. A lens hood is a device that is attached to the front of a camera lens. Its primary purpose is to block stray light from enteri...

How To Use Lens Hood And Filter ?

To use a lens hood, simply attach it to the front of your camera lens. The hood is designed to block stray light from entering the lens and causing lens flare or reducing contrast in your images. It h...

How To Use Chemex Square Filter ?

To use a Chemex square filter, start by folding the filter along the diagonal to create a cone shape. Place the folded filter into the top of the Chemex brewer, with the three-layered side facing the ...