Reviews
Solid secure case for camera memory cards
The K&F Concept memory card case holds 12x SD and 12X CF-E cards. It has a weatherproof seal between the two sections that works to keep the cards dry. I found no water in the case after submerging the case in 20cm of water for 5 minutes. Each slot for cards is cut to fit both SD and CF- express type A cards, so this means that in practice its more likely be used with a maximum of 12 cards rather than 24 cards.
The case is solidly made with a capable clip to hold together, and it's important that this is closed to stop water entering the case, and keep the cards safe in place. On the item I had the orange rubber seal was easy to dislodge from the case, so I used a couple of drops of glue to secure it.
There's a short lanyard that can be fitted to the case included in the pack, but I chose not to use it.
Good for storage of cards on a long shoot. I turn unused cards with the label side up and once the card has been used put it back in the case with the label side face down to make it easy to know which card has been used.
The case is solidly made with a capable clip to hold together, and it's important that this is closed to stop water entering the case, and keep the cards safe in place. On the item I had the orange rubber seal was easy to dislodge from the case, so I used a couple of drops of glue to secure it.
There's a short lanyard that can be fitted to the case included in the pack, but I chose not to use it.
Good for storage of cards on a long shoot. I turn unused cards with the label side up and once the card has been used put it back in the case with the label side face down to make it easy to know which card has been used.
18/10/2024
Related searches