I've had a few different tripods over the years at different price points but this is by far the best!Being a wedding and lifestyle photographer I use it in so many different settings and it doesn't fail! Each leg is individually adjustable meaning no matter the terrain you can make it level and sturdy.I love that all the connectors move so smoothly and the whole kit is incredibly robust and yet very lightweight. It all folds up neatly into the one bag/case that I've shown in the photos.The top arm can extend to a 90 degree angle which is brilliant for taking photos of flat lays etc without the legs of the tripod being in shot.Another little extra that I like is a small spirit level on the top connector just so you can make sure everything is level before you attach your camera.The tripod has a wieght hook underneath for added sturdiness in extreme conditions and one of the legs also detaches to become a monopod!Overall this tripod is an excellent bit of kit and I have been very impressed with every aspect of it especially at under £100!So if you're looking for a reliable and versatile tripod this is the one for you!
12/06/2024
K&F concept aluminium tripod with 180 degree tiltover camera head
Summery: Lightweight, sturdy, the tiltover head gives a special feature I wanted.
I own quite a few tripods and camera mounts because I have so many cameras so this one joins my collection for a special reason which I will explain in a short while.
The model is KF-TM2515T
It has 4 part telescopic legs that extend to a give a maximum tripod height of 6o inches, the legs can be used in 3 different angle positions which is adjusted using the red button at the top of each leg, there is no central connector so each leg angle can be set individually.
The centre column is in 2 parts, the outer part can be height adjusted while the second section can not only be extended vertically but it can also be tilted over 180 degrees, it was this feature that made me decide to add this to my collection, more on that in a while.
As with a lot of tripods you can invert the centre column to allow low level and macro shooting, but the tillable section adds a little extension to give a different view than one bound to the centre, you can even make an ad-hoc slider shot by slowly moving the bar along the centre column.
The tripod head is a standard 3/8 thread panning ball-head type that are found on many of my tripods, I like ball-heads for my smaller cameras. It has an Arca-Swiss type quick release clamp with a bubble for camera levelling.
The tripod is lightweight, strong, it folds down pretty small and comes with a strong looking zipped case with straps so for general purpose use it is great, with the added tilt feature to give some extra creative assistance.
Now the reason I bought this particular tripod…..I need to be able to mount 2 cameras on one tripod properly, and this tripod helps me do just that with a little bit of extra kit.
The end of the centre bar has a small plastic cap screwed into it, when taken away a 3/8 thread is revealed, most of my tripod centre column have this, it is usually there to hold the sandbag hook screw. So by using a short 3/8 inch threaded bar and an extra ball-head I can make a double tripod. Fantastic and very useful to save space when shooting.
One leg can also be removed and used with the centre column as a monopod but I already have monopods so I will not be using that feature with this tripod.
Summery: Lightweight, sturdy, the tiltover head gives a special feature I wanted.
I own quite a few tripods and camera mounts because I have so many cameras so this one joins my collection for a special reason which I will explain in a short while.
The model is KF-TM2515T
It has 4 part telescopic legs that extend to a give a maximum tripod height of 6o inches, the legs can be used in 3 different angle positions which is adjusted using the red button at the top of each leg, there is no central connector so each leg angle can be set individually.
The centre column is in 2 parts, the outer part can be height adjusted while the second section can not only be extended vertically but it can also be tilted over 180 degrees, it was this feature that made me decide to add this to my collection, more on that in a while.
As with a lot of tripods you can invert the centre column to allow low level and macro shooting, but the tillable section adds a little extension to give a different view than one bound to the centre, you can even make an ad-hoc slider shot by slowly moving the bar along the centre column.
The tripod head is a standard 3/8 thread panning ball-head type that are found on many of my tripods, I like ball-heads for my smaller cameras. It has an Arca-Swiss type quick release clamp with a bubble for camera levelling.
The tripod is lightweight, strong, it folds down pretty small and comes with a strong looking zipped case with straps so for general purpose use it is great, with the added tilt feature to give some extra creative assistance.
Now the reason I bought this particular tripod…..I need to be able to mount 2 cameras on one tripod properly, and this tripod helps me do just that with a little bit of extra kit.
The end of the centre bar has a small plastic cap screwed into it, when taken away a 3/8 thread is revealed, most of my tripod centre column have this, it is usually there to hold the sandbag hook screw. So by using a short 3/8 inch threaded bar and an extra ball-head I can make a double tripod. Fantastic and very useful to save space when shooting.
One leg can also be removed and used with the centre column as a monopod but I already have monopods so I will not be using that feature with this tripod.
10/06/2024
Super strong tripod, smooth pan head, does everything they say it does, looked at thd reviews first, and wasn't disappointed. Awesome a+++
08/06/2024
My go to, travel tripod. Stays in the car for all my photographic adventutes. I love taking it on walks, the bag is brilliant. Love it.
05/06/2024
I bought this tripod to complement my newly acquired Canon M50.
I have different tripods for different devices, but I wanted something better for the camera. I was also interested in a special feature of this tripod that you don't always find. More about that in a moment.
The tripod was delivered quickly and packed quite small, which surprised me at first.
As it is designed as a travel tripod, it is sold with a small sturdy bag.
It fits neatly into this, if it is folded correctly. More about that in a moment.
The three telescopic legs can be extended three times. They are locked with a twist lock. It holds tightly and is easy to adjust continuously.
There are small rubber feet at the ends that guarantee a non-slip, stable stand.
The angle of inclination of the legs to the centre column is adjusted with a lock that can be easily released. This also allows the legs to be raised completely upside down on the centre column.
This adjustment is needed for two different settings, and these are the two I mentioned earlier.
Firstly, it allows the tripod to be folded smaller than if you only retract the three legs completely. And only then, and after another little trick, does it fit into the bag. (Instructions are enclosed)
On the other hand, this is necessary if you want to use the option I mentioned, which is not often found on tripods. The centre column can be removed and inserted the wrong way round, allowing you to attach the camera underneath the tripod, e.g. for shooting from below or close to the ground.
This is very practical and opens up completely new possibilities for adjusting the camera.
The centre column itself can be extended twice, with another joint in the middle.
This allows the upper part of the centre column and the head to be tilted steplessly via a ball joint at an angle from vertical to 90 degrees. At a 90 degree angle, the camera looks down vertically from above on a corresponding motif. This option was important to me personally. When I wanted to have this setting, with my other tripods it was and is always a fiddly thing.
This ball joint can also be rotated around its own axis on the centre column and also locked in place.
At the end is the completely removable and replaceable head.
This also has a locking option around its own axis, as well as another ball joint with which the mounting plate can be rotated 360 degrees and tilted slightly. There is also a recess at one point, which can be used to tilt 90 degrees.
All of this is securely fastened with a locking screw.
For better orientation and adjustment, the head has a degree marking, with an arrow.
The camera mount has a small spirit level and a quick release for the camera. (with bow on the screw).
This is inserted into two jaws and tightened. It's very easy and holds great.
I have different shapes of this mount on my tripods and I like the K&F one best.
The tripod can be extended up to 154 cm and weighs 1.6 KG.
The removable head can also be used as a monopod in combination with one of the legs.
The range of variations, the quality of workmanship and the price go well together. I am very satisfied with the tripod and use it not only for photography but also for filming.
It can be stored in a space-saving way and is therefore comfortable when travelling.
I am very satisfied with it and can only recommend it.
I have different tripods for different devices, but I wanted something better for the camera. I was also interested in a special feature of this tripod that you don't always find. More about that in a moment.
The tripod was delivered quickly and packed quite small, which surprised me at first.
As it is designed as a travel tripod, it is sold with a small sturdy bag.
It fits neatly into this, if it is folded correctly. More about that in a moment.
The three telescopic legs can be extended three times. They are locked with a twist lock. It holds tightly and is easy to adjust continuously.
There are small rubber feet at the ends that guarantee a non-slip, stable stand.
The angle of inclination of the legs to the centre column is adjusted with a lock that can be easily released. This also allows the legs to be raised completely upside down on the centre column.
This adjustment is needed for two different settings, and these are the two I mentioned earlier.
Firstly, it allows the tripod to be folded smaller than if you only retract the three legs completely. And only then, and after another little trick, does it fit into the bag. (Instructions are enclosed)
On the other hand, this is necessary if you want to use the option I mentioned, which is not often found on tripods. The centre column can be removed and inserted the wrong way round, allowing you to attach the camera underneath the tripod, e.g. for shooting from below or close to the ground.
This is very practical and opens up completely new possibilities for adjusting the camera.
The centre column itself can be extended twice, with another joint in the middle.
This allows the upper part of the centre column and the head to be tilted steplessly via a ball joint at an angle from vertical to 90 degrees. At a 90 degree angle, the camera looks down vertically from above on a corresponding motif. This option was important to me personally. When I wanted to have this setting, with my other tripods it was and is always a fiddly thing.
This ball joint can also be rotated around its own axis on the centre column and also locked in place.
At the end is the completely removable and replaceable head.
This also has a locking option around its own axis, as well as another ball joint with which the mounting plate can be rotated 360 degrees and tilted slightly. There is also a recess at one point, which can be used to tilt 90 degrees.
All of this is securely fastened with a locking screw.
For better orientation and adjustment, the head has a degree marking, with an arrow.
The camera mount has a small spirit level and a quick release for the camera. (with bow on the screw).
This is inserted into two jaws and tightened. It's very easy and holds great.
I have different shapes of this mount on my tripods and I like the K&F one best.
The tripod can be extended up to 154 cm and weighs 1.6 KG.
The removable head can also be used as a monopod in combination with one of the legs.
The range of variations, the quality of workmanship and the price go well together. I am very satisfied with the tripod and use it not only for photography but also for filming.
It can be stored in a space-saving way and is therefore comfortable when travelling.
I am very satisfied with it and can only recommend it.
28/05/2024
After purchasing our first kf concept tripod we were pleasantly surprised by the quality of the materials, the solidity and the value for money. So we decided to renew the tripods in our studio. As soon as we bought it we put it to the test with two sets of studios and it proved to be as good as we expected!
In the box we find our tripod , carrying bag , always useful in case of travel where you need to bring a studio tripod , and ... .
The tripod is very compact, when closed it measures only 40cm, which makes it ideal to be transported on photographic trips and long journeys, its lightness makes it easy to carry and to put in a luggage in case of air travel. Fully extended it reaches a height of 154 cm and thanks to its 5 sections it can be adjusted with good precision. The 5 section extenders are screw fasteners, we usually tend to prefer the hook fasteners but these have proved to be very practical, just take them all together with one hand and in one movement they can all be unscrewed, great for those who need to extend the tripod quickly. As in many tripods you have the possibility to unhook one of the legs and make it become a monopod, very quick on this tripod but the fixing system is really good and the grip on the unscrewing pod makes it very comfortable to use.
Let's move on to the ball head, which allows excellent flexibility in shooting, reaching any desired angle and being able to rotate 360°. The base of the head in turn has the possibility of having a fluid 360° rotation, useful both for panoramas and for videos, where the graduated scale at its base becomes very convenient. The release plate is good, even if it is made of plastic. But we come to the real highlight of this tripod, the transverse column, is in fact the main reason why we bought this tripod, the ability to move from the area where the feet of the tripod would be in the view and shoot perpendicularly downwards. Good extension, allows you to work easily with vertical shots on many surfaces, tables, floors, as well as to shoot from elevated ledges without risking the equipment or having to lean out personally, also great when you shoot by reversing the tripod in order to reach perspectives otherwise impossible.
PRO
Transverse column
Ball head
Lightness
Compactness
COUNTER Nothing major, the lightness means it's counterbalanced if you're outdoors or shooting with heavy equipment but that's even with high end and much more expensive tripods
WOULD YOU RECOMMEND
This tripod at a very affordable price point is definitely one of the best if not the best on the market, complete with every feature a tripod should have in 2019 it offers everything at a hyper competitive price, the quality is great and the tripod passed our tests with flying colours, obviously all in relation to the price. Excellent alternative to much more expensive tripods, recommended for amateur and professional photographers but also for those who want a tripod that can be used to make videos on youtube, even for unboxing and overhead shots!
In the box we find our tripod , carrying bag , always useful in case of travel where you need to bring a studio tripod , and ... .
The tripod is very compact, when closed it measures only 40cm, which makes it ideal to be transported on photographic trips and long journeys, its lightness makes it easy to carry and to put in a luggage in case of air travel. Fully extended it reaches a height of 154 cm and thanks to its 5 sections it can be adjusted with good precision. The 5 section extenders are screw fasteners, we usually tend to prefer the hook fasteners but these have proved to be very practical, just take them all together with one hand and in one movement they can all be unscrewed, great for those who need to extend the tripod quickly. As in many tripods you have the possibility to unhook one of the legs and make it become a monopod, very quick on this tripod but the fixing system is really good and the grip on the unscrewing pod makes it very comfortable to use.
Let's move on to the ball head, which allows excellent flexibility in shooting, reaching any desired angle and being able to rotate 360°. The base of the head in turn has the possibility of having a fluid 360° rotation, useful both for panoramas and for videos, where the graduated scale at its base becomes very convenient. The release plate is good, even if it is made of plastic. But we come to the real highlight of this tripod, the transverse column, is in fact the main reason why we bought this tripod, the ability to move from the area where the feet of the tripod would be in the view and shoot perpendicularly downwards. Good extension, allows you to work easily with vertical shots on many surfaces, tables, floors, as well as to shoot from elevated ledges without risking the equipment or having to lean out personally, also great when you shoot by reversing the tripod in order to reach perspectives otherwise impossible.
PRO
Transverse column
Ball head
Lightness
Compactness
COUNTER Nothing major, the lightness means it's counterbalanced if you're outdoors or shooting with heavy equipment but that's even with high end and much more expensive tripods
WOULD YOU RECOMMEND
This tripod at a very affordable price point is definitely one of the best if not the best on the market, complete with every feature a tripod should have in 2019 it offers everything at a hyper competitive price, the quality is great and the tripod passed our tests with flying colours, obviously all in relation to the price. Excellent alternative to much more expensive tripods, recommended for amateur and professional photographers but also for those who want a tripod that can be used to make videos on youtube, even for unboxing and overhead shots!
25/05/2024
I bought this tripod to use for flatlay photography.The tripod is not safe or sturdy with a Canon 6D and 24-70m lens. You MUST add a counter weight the other end for this style of photography.I ended up unscrewing the weight hook at the bottom of the tripod and screwing it into the top horizontal end (see image) to counter weight the camera.The only issue with moving the weight hook to the horizontal bar is that you cant fold it away without having to unscrew it all again.I am happy i can make my style of photography work with this, but for the price, i dont think its anything special! The horizontal bar is too short. Also instructions are not great!
17/01/2024
Product was light and relatively stable And the 90 degree overhead pivot is extremely useful for food photography. However, the rotation degrees were not lined up, nor could they be. They were just for show. The legs were also annoyingly difficult to get up and down quickly as they were screw tightened. The whole tripod was rendered useless after less than a week of light use when the screw handle to tighten the extendable top arm snapped with the arm extended. The tightening handle for the screw was only glued on with a dab of glue, and not properly and secured and linked to the screw. This tripod looks cheap at first, but it is not. For what it is, which is cheap, poorly made rubbish, it is vastly overpriced. This tripod is not even worth £20. I returned for a refund and bought a vanguard tripod with the same features for only £15 more. Buy cheap, buy twice. Do not make my mistake.
15/01/2024
Wow! That should say it all. This is the best tripod I have ever owned. My Manfrotto is going on Gumtree. Sorry Manny. I've also got a no name pan and tilt that doesn't even come close. I am 100 percent happy with it. The articulated boom is something I never thought I would need, now I don't know how I managed without it. A great buy at an unbelievable price.
19/08/2023